|Application||Uncoated paper, coated paper, vellum|
|Drying time||Heat embossing powder until it melts. It will take approximate 20 - 30 seconds using an embossing heat gun.)
Melting time will vary according to the amount of powder and heat source used.
An embossing heat gun is the recommended heat source for use with Emboss powders.
Stamp image using a slow drying pigment ink (VersaColor, VersaMark, etc.) Sprinkle embossing powder on image and shake / brush off excess powder. Carefully apply heat via an embossing heat gun or other heat source until the powder melts. The surface will become glossy as the design rises. Melted powder is water resistant - great for use with watercolor markers or paints. With VersaMark (or VersaMark Dazzle) and clear embossing powder, you can create an elegant translucent embossed image on colored papers.
A stamp, ink or embossing marker, a surface to apply image (paper), a fine brush and a heat source (embossing heat gun, toaster oven or iron.)
Gold (gold metallic matte), silver (silver metallic matte), copper (copper metallic matte).
Stamp with Emboss or VersaMark, apply embossing powder and heat. We recommend using the same color ink and embossing powder for the truest color results.
Immediately sprinkle powder onto stamped image. Apply liberally so that powder adheres evenly.
＊Hint: placing your work on top of a larger piece of paper with a folded crease makes easy work of gathering and returning excess powder to the bottle.
Sprinkle powder evenly onto design and gently shake or brush off excess powder.
Return excess powder to bottle, careful to not mix in any dirt or dust. If you are embossing multiple designs, you can dispense powder into a shallow tray and bring the paper / stamped image to the powder. Act quickly and apply powder liberally while ink is still wet.
Be careful not to overheat or burn the embossing powder.
Use an embossing heat gun to melt powder. When using a toaster oven, hold the paper with tweezers and heat until powder melts. When heating with an iron, stand the iron up, hold the paper with tweezers and heat the paper from the back (do not allow iron to touch paper.)
●Use caution when applying heat. Heat sources can cause burns.
Clear (transparent), Sparkle (clear with silver glitter - best with dark colored inks), Bridal (pastel pearl with crystal lamé) and Pearl(pastel pearl)
Use colored inks with clear embossing powders on light colored papers. Clear inks can be embossed with clear embossing powders on colored papers for a two tone effect. Use plenty of ink and apply a liberal amount of powder.
If you are embossing multiple designs, you can dispense powder into a shallow tray and bring the paper / stamped image to the powder. Act quickly and apply powder liberally while ink is still wet.
Take care not to overheat or burn the embossing powder.
(1)Embossing Powder 30ml
(2)Embossing Ink Pad
(3)Embossing Dual Pen I
3.5mm Calligraphy +
Fine Point Nib
(2)Embossing Dual Pen II
2.0mm Calligraphy +
Same color as
Embossing Dual Pen I
(5)Embossing Pen 6PC Set
(6)Embossing Pen 144PC Display
(7)Emboss Inker 15ml