EMBOSS

EMBOSS

The finished surface has a raised, glossy appearance, providing an easy and luxurious finish.

Product Specs

OTHERS

A range of creative inks that expand expressive possibilities.

* For details, please check the “Applications” and other specifications.

  • Acid-Free
  • Absorption Dry
  • Requires Heating
  • Embossing Only
Applications
Cardstock Glossy paper (coated paper) Tracing vellum paper
Drying Time
Apply heat until the powder melts (using an heat gun for about 20-30 seconds).
Note that the heating time may vary depending on the amount of powder used and the equipment used.
Cautions
* To create a raised, glossy surface that adds a luxurious touch to your work, use ink suitable for embossing, then sprinkle embossing powder over the stamped area and heat it.
* Use clear powder with colored ink.
* Opaque powder can be used with any ink, but we recommend using a dedicated EMBOSS stamp pad or VersaMark.
* Apply the powder liberally, then brush off any excess powder that remains on areas other than the stamped image and return it to the bottle.
* We recommend using a heat gun, but you can also use a hot plate with aluminum foil (be careful not to get powder on the plate) or oven toaster.
* Be careful not to burn yourself during the process. Embossing cannot be done on fabric, and a hair dryer cannot be used for embossing.
* Coarse glitters are difficult to apply, so we recommend using fine pearl powders.

How to Use & Tips

Opaque (Gold, Silver, Copper, White):

Stamp with Emboss or VersaMark, apply embossing powder and heat. We recommend using the same color ink and embossing powder for the truest color results.

Return excess powder to bottle, careful to not mix in any dirt or dust. If you are embossing multiple designs, you can dispense powder into a shallow tray and bring the paper / stamped image to the powder. Act quickly and apply powder liberally while ink is still wet.

Be careful not to overheat or burn the embossing powder.

Immediately sprinkle powder onto stamped image. Apply liberally so that powder adheres evenly.

*Hint: placing your work on top of a larger piece of paper with a folded crease makes easy work of gathering and returning excess powder to the bottle.

Use an embossing heat gun to melt powder. When using a toaster oven, hold the paper with tweezers and heat until powder melts. When heating with an iron, stand the iron up, hold the paper with tweezers and heat the paper from the back (do not allow iron to touch paper.)

●Use caution when applying heat. Heat sources can cause burns.

Sprinkle powder evenly onto design and gently shake or brush off excess powder.

 

Clear types (Clear, Sparkle, Bridal, Pearl):

Use colored inks with clear embossing powders on light colored papers. Clear inks can be embossed with clear embossing powders on colored papers for a two tone effect. Use plenty of ink and apply a liberal amount of powder.

Apply heat.

If you are embossing multiple designs, you can dispense powder into a shallow tray and bring the paper / stamped image to the powder. Act quickly and apply powder liberally while ink is still wet.

Take care not to overheat or burn the embossing powder.

Product Lineup

EMBOSSING STAMP PAD
Product name: EMBOSSING STAMP PAD
Item No.: SEM-*
Colors: 2 colors
Body size: W99×D68×H19(mm)
Impression size: 76×47(mm)
  • SEM-C

    Clear

    UPC:712353441033

  • SEM-T

    Tinted

    UPC:712353441040

EMBOSSING STAMP PAD Inker
Product name: EMBOSSING STAMP PAD Inker
Item No.: SEMR-*
Colors: 2 colors
Body size: φ24×H66(mm)
  • SEMR-C

    Clear

    UPC:712353444034

  • SEMR-T

    Tinted

    UPC:712353444041

Products in “Others” category

▲